Top 18 Robinson Racings

 

Robinson Racing 8572 Steel Spur Gear 72T NRU TMX

Robinson Racing 8572 Steel Spur Gear 72T: NRU TMX

Robinson Racing 8572 Steel Spur Gear 72T: NRU TMX - Overviewrrp steel t-maxx / 2. . This spur takes the stock friction pegs (tra4685) for best performance use 12 new pegs. 5 maxx 72t spur gear is precision machined and hardened.

 

Robinson Racing 8719 19T 8 Mod 5mm Pinion Gear

Robinson Racing 8719, 19T .8 Mod 5mm Pinion Gear

Robinson Racing 8719, 19T .8 Mod 5mm Pinion Gear - Hrp rc toys. Upgrade parts. Hard 5mm bore(8) pinion 19t. Sku rrp8719. Upc 719696087195.

 

Robinson Racing Products 1425 Absolute Pinion Gear 48P 25T

Robinson Racing Products 1425 Absolute Pinion Gear 48P, 25T

Robinson Racing Products 1425 Absolute Pinion Gear 48P, 25T - 1/16 inch allen wrench (not included) fits the 5/40 set screw. One 5-40 set screw included. Overviewsuper hard absolute steel pinions gears are a must for running with steel spur gears or will last and last if run with a plastic spur gear. . Tooth number stamped on each pinion. 1/8 inch bore.

 

Robinson Racing 1120 48P Metric Pinion 20T

Robinson Racing 1120 48P Metric Pinion 20T

Robinson Racing 1120 48P Metric Pinion 20T - 6 module pinions precision cut from hard steel alloy, lightened for reduced weight. Overviewmetric. Most commonly used on kyosho and tamiya electric cars and trucks. 1/16 inch allen wrench (not included) fits the 5/40 set screw. 1/8 inch bore. One 5-40 set screw included.

 

Robinson  Racing Products 1541 AX10 Hardened Steel Idler Gear

Robinson Racing Products 1541 AX10 Hardened Steel Idler Gear

Robinson Racing Products 1541 AX10 Hardened Steel Idler Gear - . This is the robinson racing hard steel idler gear. This rrp steel idler gear is a great upgrade to your axial ax10 scorpion.

 

Robinson Racing Products 8712 Hard Bore 08 Module Pinion Gear 12T 5mm

Robinson Racing Products 8712 Hard Bore 0.8 Module Pinion Gear, 12T, 5mm

Robinson Racing Products 8712 Hard Bore 0.8 Module Pinion Gear, 12T, 5mm - One 4mm set screw included. Can be run on cars using a 5mm motor shaft. Note 32 pitch and. Overviewextra hard high carbon brushless motor pinions are built to last with hi-performance gen3 steel slipper units. 00027 of an inch. 5mm to 1/8 inch reducer sleeve required for 1/8 inch shaft motors. 8 module gears can be used together with no adverse affects such as increased noise or increased wear. 2mm allen wrench (not included) fits the 4mm set screw. The difference is that. Pinion is precision machined and stamped with the number of teeth. 8 module gears have a slightly larger outside diameter per tooth, roughly.

 

ROBINSON RACING 8619 Extra Hard 19T Blackened Steel 32P Pinion 5mm Toy

ROBINSON RACING 8619 Extra Hard 19T Blackened Steel 32P Pinion 5mm [Toy]

ROBINSON RACING 8619 Extra Hard 19T Blackened Steel 32P Pinion 5mm [Toy] - Overviewextra hard high carbon motor pinions are built to last with our hi-performance gen3 steel slipper units. Also, rrp#1200 5mm to 1/8 inch reducer sleeve required for 1/8 inch shaft motors. 8 module gears have a slightly larger outside diameter per tooth, roughly. All pinions precision machined and stamped with the number of teeth. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making these gears ideal for use with metal spur gears. The difference is that. 00027 of an inch. One 4mm set screw included. Please note 32 pitch and. . 8 module gears can be used together with no adverse affects such as increased noise or increased wear. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on motors using a 5mm motor shaft including traxxas, associated, and hpi models or for any heavy duty application. Made from high carbon steel and then heat treated to increase the hardness of the surface even more.

 

Robinson Racing Products 1023 Pinion Gear 48P 23T

Robinson Racing Products 1023 Pinion Gear 48P, 23T

Robinson Racing Products 1023 Pinion Gear 48P, 23T - Pinions are stamped with tooth number. One 5-40 set screw included. 1/8 inch bore. Overviewthe 48 pitch hard nickel plated alloy steel pinions are precision cut gears that last and last when used with a plastic spur gear. 1/16 inch allen wrench (not included) fits the 5/40 set screw.

 

Robinson Racing 1712 Hardened 32P Absolute Pinion 12T

Robinson Racing 1712 Hardened 32P Absolute Pinion 12T

Robinson Racing 1712 Hardened 32P Absolute Pinion 12T - One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw. Pinion is stamped with tooth number. 1/8 inch bore. Overviewextra-hard 32 pitch pinions are a must for use with our steel spur gears and will last and last with plastic spur gears.

 

ROBINSON RACING 8172 Dbl-Disk Slipper Kit T-Maxx RRPC8172

ROBINSON RACING 8172 Dbl-Disk Slipper Kit T-Maxx RRPC8172

ROBINSON RACING 8172 Dbl-Disk Slipper Kit T-Maxx RRPC8172 - 6 (2. This is an optional part that includes a 72 tooth plastic spur gear. This is the double disk plastic spur slipper kit for the traxxas tmaxx. Features anodized blue slipper plates. Specifications overall thickness 10mm (. Black plastic spur gear and holder. Two slipper disks one ball bearing ( three black screws one instruction sheet requirements assembly on kit. 394″) overall diameter 58. 307″) pjm 3/17/02 ir/kh &. Ball bearing replaces stock bushing. One spur gear holder two blue slipper plates. You will receive one plastic spur gear ring 72t.

 

Robinson Racing 1416 48P Absolute Pinion 16T

Robinson Racing 1416 48P Absolute Pinion 16T

Robinson Racing 1416 48P Absolute Pinion 16T - Tooth number stamped on each pinion. 1/8 inch bore. Overviewsuper hard absolute steel pinions gears are a must for running with steel spur gears or will last and last if run with a plastic spur gear. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.

 

Robinson Racing 1118 48P Metric Pinion 18T

Robinson Racing 1118 48P Metric Pinion 18T

Robinson Racing 1118 48P Metric Pinion 18T - Most commonly used on kyosho and tamiya electric cars and trucks. 6 module pinions precision cut from hard steel alloy, lightened for reduced weight. Overviewmetric. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.

 

Robinson Racing 1201 4x4mm Set Screw5 5mm Pinion

Robinson Racing 1201 4x4mm Set Screw(5): 5mm Pinion

Robinson Racing 1201 4x4mm Set Screw(5): 5mm Pinion - These are best when used with a plastic spur gear. These are precision cut gears that last and last. 4x4mm set screw(5) 5mm pinion.

 

Robinson Racing 1014 48 Pitch Pinion Gear 14t

Robinson Racing 1014 48 Pitch Pinion Gear 14t

Robinson Racing 1014 48 Pitch Pinion Gear 14t - 1/16 inch allen wrench (not included) fits the 5/40 set screw. One 5-40 set screw included. Pinions are stamped with tooth number. 1/8 inch bore. Overviewthe 48 pitch hard nickel plated alloy steel pinions are precision cut gears that last and last when used with a plastic spur gear.

 

Robinson Racing Products Xtra Hard 17T Clutchbell Savage X

Robinson Racing Products Xtra Hard 17T Clutchbell: Savage X

Robinson Racing Products Xtra Hard 17T Clutchbell: Savage X - 1″ (28mm) eew 7/27/06ir/jxs &. Features constructed of hardened steel you will receive one robinson racing products 17 tooth clutch bell requirements installing over clutch assembly on engine crankshaft specifications number of teeth 17 diameter 1. 25 size engine. 21 and. This is the robinson racing products 17 tooth clutch bell for the hpi savage vehicles with the.

 

Robinson Racing Products 1028 Pinion Gear 48P 28T

Robinson Racing Products 1028 Pinion Gear 48P, 28T

Robinson Racing Products 1028 Pinion Gear 48P, 28T - One 5-40 set screw included. Overviewthe 48 pitch hard nickel plated alloy steel pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/16 inch allen wrench (not included) fits the 5/40 set screw. 1/8 inch bore.

 

Robinson Racing Products 8713 Hard Bore 08 Module Pinion Gear 13T 5mm

Robinson Racing Products 8713 Hard Bore 0.8 Module Pinion Gear, 13T, 5mm

Robinson Racing Products 8713 Hard Bore 0.8 Module Pinion Gear, 13T, 5mm - Note 32 pitch and. Pinion is precision machined and stamped with the number of teeth. 00027 of an inch. 8 module gears have a slightly larger outside diameter per tooth, roughly. Can be run on cars using a 5mm motor shaft. One 4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. The difference is that. 8 module gears can be used together with no adverse affects such as increased noise or increased wear. 5mm to 1/8 inch reducer sleeve required for 1/8 inch shaft motors. Overviewextra hard high carbon brushless motor pinions are built to last with hi-performance gen3 steel slipper units.

 

Robinson Racing Products 8724 Hard Bore 08 Module Pinion Gear 24T 5mm

Robinson Racing Products 8724 Hard Bore 0.8 Module Pinion Gear 24T, 5mm

Robinson Racing Products 8724 Hard Bore 0.8 Module Pinion Gear 24T, 5mm - 8 module gears can be used together with no adverse affects such as increased noise or increased wear. Overviewextra hard high carbon brushless motor pinions are built to last with hi-performance gen3 steel slipper units. 00027 of an inch. The difference is that. One 4mm set screw included. Pinion is precision machined and stamped with the number of teeth. 8 module gears have a slightly larger outside diameter per tooth, roughly. Note 32 pitch and. 5mm to 1/8 inch reducer sleeve required for 1/8 inch shaft motors. Can be run on cars using a 5mm motor shaft. 2mm allen wrench (not included) fits the 4mm set screw.